Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Cables
Whether you're looking for bicycle cable housing or cables, we have all the options you need to make a choice you can be confident with.
$9.98 - $18.85
Spiral cable wrap manages those messy cables to achieve a sleek clean look while protecting shifting, braking, and electronic bike cables and hoses.
$25.00
Precision-machined 4mm ID brass cable ferrules for improved shifting performance. A flat bottom on the inside prevents housing from pulling through ferrules. For use with most shifting cables.
- Inside diameter: 4mm
- Outside diameter: 5. 75mm
- Overall length: 12. 7mm
- Material: brass
- Bottle of 50pcs
$34.60
- Aluminum cable crimps to prevent frayed cables
- 1.2mm for shift cables or 1.6mm for brake cables
- Silver aluminum
- 250-count bottle
$42.50
Precision-machined 4mm ID silver aluminum cable ferrules for improved shifting performance. A flat bottom on the inside prevents housing from pulling through ferrules. For use with most shifting cables.
- Inside diameter: 4mm
- Outside diameter: 5.75mm
- Overall length: 12.7mm
- Material: aluminum
- Bottle of 50pcs
$42.50
Precision-machined 5mm ID silver aluminum cable ferrules for improved braking performance. A flat bottom on the inside prevents housing from pulling through ferrules. For use with most brake cables.
- Inside diameter: 5mm
- Outside diameter: 5.75mm
- Overall length: 12.7mm
- Material: aluminum
- Bottle of 50pcs
$7.00
- Vision Aero/reverse brake lever specific brake cable
- Replacement cables that only work with Vision reverse brake levers
- Sold individually
$3.99
Original equipment for your mountain bike.
- Original Equipment on Trek Marlin models starting in 2019
- Required for routing front derailleur cables
- Not needed on 1x drivetrains
$5.99
For proper assembly.
- Machined aluminum
- For specific compatibility concerns, please contact our Customer Service team
$11.99
For proper assembly.
- Brake housing stop with slot for cleanly routing Shimano E-Tube wire
- Allows for clean routing of your Di2-equipped bike
- For an ultra-clean setup, use heat shrink tubing around brake housing and E-Tube wire
$41.99
Genuine replacement parts
All the parts you need to keep your Boone fresh.
For proper assembly.
- For 2014-2018 Boone
- For specific compatibility concerns, please contact our Customer Service team
$2.99
- Steel cable noodle with alloy end caps
- Includes plastic liner
$5.79
- Galvanized steel inner wire
- Standard 5mm brake housing
- Front or Rear
$5.99
- Galvanized steel inner wire
- Standard 5mm S.I.S. housing
- Front or Rear
- Mountain or road
$5.99
- Galvanized steel inner wire
- PTFE lined brake housing
- Front or Rear
- Mountain or road
$6.99
- Replacement front cable hanger
- Steel construction
- Includes barrel adjuster
- Steerer Diameter: 25.4mm
$7.39
- For mountain bike cable-actuated brakes
- 1.5mm x 3000mm
- Stainless steel
$7.99
- Stainless steel shifter cable
- PTFE-coated for reduced friction
- Length: 2000mm
- 1.1mm compatible with Shimano, SRAM, and Campagnolo shifters
- 1.2mm compatible with Shimano and SRAM shifters
$21.99
- 50 feet (15.2 meters) length
- 5mm diameter cable housing
- For brake cables
$23.09
- Flexible linear pull brake guide
- Guides cable to brake arm
- Bag of 10
$25.99
- 50 feet (15.2 meters) length
- 5mm diameter brake cable housing
$9.00
- Wet or muddy condition cable sealing solution
- 4/6mm
$10.99
Shimano Stainless Derailleur Cables
Cable Head: Shimano/SRAM
Cable Type: Stainless
Defined Color: Gray
Diameter: 1.2mm
Double Ended: No
Length: 3000 mm
Quantity Included: 1
$24.99
- Pre-lubed with special polymer compatible grease
- Polymer-coated inner cable reduces the sliding resistance to achieve lighter and quicker operation
- Stainless steel for anti-rust protection
- Low friction polymer material on the cable may cause slippage at the cable fixing bolt after initial pre-stretch for the cable is performed. Fur like material from polymer coating will not affect the performance
- Ultegra grade SLR-EV Road brake cable set
$27.00
- 1.2 mm x 2100 mm (1 pc.)
- 1.2 mm x 1800 mm (1 pc.)
- OPTISLICK
- Stainless steel
- Outer cap with short tongue for ST (2 pcs.)
- SIS-SP40 outer caps (3 pcs.)
- SIS-SP40 sealed outer caps (1 pc.)
- Inner end caps (2 pcs.)
- OT-SP41 1700 mm
- OT-RS900 (1 pc.)
$29.99
Shimano Stainless Road/MTB Brake Cable & Housing Sets
- 1 x 2000mm black 5mm housing
- 1 x 1000mm and 1 x 2050mm 1.6mm stainless cables
- 2 end caps and 2 cable crimps
$42.00 - $55.99
Shimano Dura-Ace BC-9000 Polymer Road Brake Cable & Housing sets reduce the sliding resistance to achieve lighter and quicker operation.
- Dura-Ace grade SLR-EV Road brake cable set
- Stainless steel for anti-rust protection
- Low friction polymer material on the cable may cause slippage at the cable fixing bolt after initial pre-stretch for the cable is performed. Fur-like material from polymer coating will not affect the performance
- Pre-lubed with special polymer compatible grease
$46.00
Shimano XTR OT-SP41 Polymer Coated Derailleur Cable Sets
$46.99
These PTFE-coated, stainless steel cable and housing sets reduce the sliding resistance to achieve lighter and quicker operation.
Includes:
- 1400mm x 5mm housing x 1
- 800mm x 5mm housing x 1
- 2050mm x 1.6mm cable x 1
- 1000mm x 1.6mm cable x 1
$130.00
- Brake housing for polymer coated brake cables
- Refer to Documents and links to find the right product
$2.99
- Brake casing has internal lining and external plastic coating
- Derailleur casing is compressionless with internal lining and external plastic coating
$2.99
- Brake casing has internal lining and external plastic coating
- Length: 30m
$4.99
- Hydraulic Disc Brake Hose Fitting Kit
- Includes 5 threaded hosebarbs, 5 red comp fittings, 1 T8 Torx
- Compatible with Stealthamajig and standard levers
$6.00 - $9.00
Stainless steel cables are extruded to provide a smooth, low-friction surface.
$6.00 - $7.00
- Left and right shifter compatible
- Road and MTB compatible
- 1.1mm polished stainless steel cable
$8.00
SRAM's Cable Housing/Hydraulic Line Rotating Hooks secure your cable housings to hold them the way you want them, keep them from hitting each other, and making rattling noises, and they provide a tidy custom look, too.
$15.00
Cables are coated with a durable low-friction polymer.
- Dupont Tefzel coating is more durable than previous coated cables
- Length: 2350mm
- Diameter: 1.6mm
- Double Ended: No
$19.00
SRAM's Inline Barrel Adjusters are placed on your shift cables near the handlebars so that you can turn the adjusters to fine-tune your shifting. They feature durable and light aluminum/composite construction with rubber covers for easy operation.
$19.00
SRAM's Inline Barrel Adjusters are placed on your brake cables near the handlebars so that you can turn the adjusters to fine-tune your braking. They feature durable and light aluminum/composite construction with rubber covers for easy operation.
$22.00
- Complete ferrule and cable end kit
- Includes: Shift 4.0mm (Qty10), Brake 5.0mm (Qty 6), Cable Tip (Qty 4)
- Material: Aluminum
$24.31 - $46.00
$46.00
Up to 47% Off
SRAM's Guide Hydraulic Line Kit is a replacement hose kit for all Guide brakes.
- Compatible with SRAM Guide R, RS, RSC, and DB5 brakes
- Length: 2000mm
$29.90
- Aluminum cable-end crimps for derailleur or brake applications to prevent fraying after the final cut
Page 1 of 4
Next page