Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Headsets
$63.99
The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability, and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Integrated bearings fit directly into compatible head tubes without the need of a bearing press.
- Sealed black oxide bearings
- Carbon-friendy compression ring captured in top cover, keeping shims in place
- Steel crown race with integrated seals
- Interlok spacer compatible
- Uses 36/45 degree crown race and compression ring
- Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately)
$63.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.
$72.00 - $84.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 headsets.
• Technical Description: EC49/30/H12/x
• Bottom Type: EC - External Cup
• Bottom Head Tube Inside Dia.: 49.61mm
• Crown Race Seat Dia.: 30.015mm
• Crown Race Type: Aluminum, Dual-Seal
• Bottom Stack Height: 12mm
• Bottom Bearing Type: Top-quality, sealed stainless steel bearings
• Material: 7075 aluminum
• Weight: 83.01g
$74.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.
$78.99
The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Zero stack uppers press into head tube with very little stack height. Lowers are either zero stack or external cup.
- Sealed black oxide bearings
- Carbon-friendy compression ring captured in top cover, keeping shims in place
- Steel crown race with integrated seals
- Interlok spacer compatible
- Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately)
$79.99 - $95.99
The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Zero stack uppers press into head tube with very little stack height. Lowers are either zero stack or external cup.
- Sealed black oxide bearings
- Carbon-friendy compression ring captured in top cover, keeping shims in place
- Steel crown race with integrated seals
- Interlok spacer compatible
- Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately)
$82.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 headsets.
• Technical Description: IS42/28.6/H9/x
• Top Type: IS- Integrated
• Top Head Tube Inside Dia.: 42.1mm
• Stem Clamp Dia.: 28.6mm
• Top Stack Height: 9mm (Short), 15mm (Tall)
• Top Bearing Type: Top-quality, sealed stainless steel bearings
• Material: 7075 T Aluminum
• Weight: 41.81g
$84.99
This is the Bottom External Cup for the Cane Creek 110 Series headset. Please contact us if you have any questions about which parts are correct for your headset.
$84.99
This is the Bottom for the Cane Creek 110 Series ZeroStack headset. Please contact us if you have any questions about which parts are correct for your headset.
- For 1.5-inch crown race diameter
- Stack height: 4mm
- 54 grams
$84.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets.
• Technical Description: ZS44/28.6|EC44/40
• Top Type: ZS - ZeroStack
• Top Head Tube Inside Dia.: 44.0mm
• Stem Clamp Dia.: 28.6mm
• Top Stack Height: 8mm
• Top Bearing Type: Black Oxide, Sealed
• Bottom Type: EC - External Cup
• Bottom Head Tube Inside Dia.: 44.0mm
• Crown Race Seat Dia.: 39.79mm
• Crown Race Type: Steel, Face-Sealed
• Bottom Stack Height: 12mm
• Bottom Bearing Type: Black Oxide, Sealed
• Material: 6061 aluminum
$94.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 headsets. And, the 110 comes with an amazing 110-year, no-questions-asked warranty!
- Technical Description: IS41/28.6/H9/x
- Top Type: IS - Integrated
- Top Head Tube Inside Dia.: 41.1mm
- Stem Clamp Dia.: 28.6mm
- Top Stack Height: 9mm (Short), 15mm (Tall)
- Top Bearing Type: Top-quality, sealed stainless steel bearings
- Material: 7075 aluminum
- Weight: 41.81g
$94.99
This is the Short Top Cover for the Cane Creek 110 Series ZeroStack headset. Please contact us if you have any questions about which parts are correct for your headset.
- For 1 1/8-inch fork/headset
- Stack height: 8mm
- 53 grams
$99.99 - $119.99
Cane Creek headsets with Hellbender stainless steel bearings with increased sealing elements and more grease in relation to the comparable 110 bearing.
- Designed to bridge the gap between the 40-series and 110-series headsets
$119.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 110 Series has light, tough, and beautiful machined 7075 T6-aluminum cups that are contoured and relieved for even more gram shaving and strength. You also get top-quality split-lip sealed stainless-steel bearings, a carbon-friendly captured compression ring and a dual-sealed crown race and complete upper bearing seal to keep the grease in and the dirt out. What's more, the seals are low-friction to improve steering performance and there are no loose headset parts so maintenance is easy. The 110 comes with an amazing 110-year, no-questions-asked warranty too!
$119.99
Building upon Cane Creek's ongoing legacy of bicycle headset innovation, the introduction of the New Hellbender 70 Visco brings new patented steering stabilizing technology to a wide variety of cycling disciplines. Designed to reduce high-frequency oscillation of the bicycle steering assembly, known as speed wobble. The Cane Creek Hellbender 70 Visco headset helps riders maintain control, reduce fatigue and ride with confidence.
-Stabilized steering with Cane Creek’s Patented headset damping technology; utilizing Micro-thin plates with fluorocarbon gel in between
-Includes a pre-set “mid-tune” damping, each layer; Damping effects are tunable for rider preference
-7075 T6 Aluminum construction
-Sealed, stainless-steel Hellbender bearings
$143.99
Backed by a 110-year warranty and constructed in Fletcher, NC, the 110-Series headset is designed with no compromises in quality, durability, or finish quality. Integrated bearings fit directly into compatible head tubes without the need of a bearing press.
- Sealed stainless steel bearings
- Carbon-friendy compression ring captured in top cover, keeping shims in place
- 7075 T-6 aluminum cups machined in Fletcher, NC
- Aluminum dual seal crown race protects lower bearing
- Interlok spacer compatible
- 110 year warranty
$159.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 110 Series has light, tough, and beautiful machined 7075 T6-aluminum cups that are contoured and relieved for even more gram shaving and strength. You also get top-quality split-lip sealed stainless-steel bearings, a carbon-friendly captured compression ring and a dual-sealed crown race and complete upper bearing seal to keep the grease in and the dirt out. What's more, the seals are low-friction to improve steering performance and there are no loose headset parts so maintenance is easy. The 110 comes with an amazing 110-year, no-questions-asked warranty too!
$31.00
These baseplates are the foundation that keeps Chris King headsets turning with legendary smoothness. Manufactured from high-quality stainless steel or titanium, Chris King makes replacement baseplates for all standard sizes and a number of ingenious solutions for those that need something a little special to make their headset work.
- Engineered and manufactured in Portland, Oregon USA
- Devolution baseplates are a stainless steel solution that allow Chris King headsets to adapt to a wide variety of steerer tube sizes
- 30.0mm for 1.5 lower bearing and 1 1/8" steerer
$18.00
ABI Headset Bearing for new builds or replacements.
$22.00
ABI Headset Bearing for new builds or replacements.
$31.99
High-quality replacement headset bearings are smooth like butter.
- Sealed cartridge bearing for long life
- Durable steel bearing housing
$37.67
ABI Headset Bearing for new builds or replacements.
- Enduro Headset Bearing ACB 4545 137 Stainless 37 x 46.85 x 7 mm: 45 x 45
$39.99
ABI Headset Bearing for new builds or replacements.
$3.00
FSA Standard Headset Bearings
$13.00
FSA bearings that set directly into the frame without the use of pressed in cups.
- 36/45 degrees is Cane Creek-compatible
- 45/45 degrees is Campagnolo-compatible
$14.99 - $24.00
- Forged steel cups with caged 5/32" ball bearings
- TH-857 features a alloy top cover
- TH Series: External Cup, traditional
- S.H.I.S.: EC34/28.6|EC34/30
- Stack: 14.9mm/11mm
- Color: Black
- Weight: 126g
$16.00
Replacement headset bearings from FSA.
- Compatible with most Trek MTB integrated headset systems
- Sealed bearing for long life
- Compatible with Knock Block Headsets
$16.99
- CrMo headset with oversized 3/16" lower ball bearings, 5/32" upper bearings and a nylon top cover
- Hammer: External Cup, traditional
- S.H.I.S.: EC34/28.6|EC34/30
- Stack: 12.8mm/11.9mm
- Color: Black
- Weight: 149g
$19.00
Replacement headset uppers from FSA.
- S.H.I.S. Stem Clamp Diameter: 28.6 Threadless
- Bearing Type: Cartridge
- S.H.I.S Upper: IS41
- Upper Stack Height: 8.2
$19.00 - $39.99
- No. series headsets offer excellent performance and value
- No. 8b: 36x45 degree Cane Creek Integrated, or No. 10: Zero Stack shallow available for 1-1/8" applications
- No. 10 S.H.I.S.: ZS44/28.6|ZS44/30
- No. 8B S.H.I.S.: IS42/28.6|IS42/30
- Stack: 5.2mm/3.7mm (No. 10), 8mm/1mm (No. 8B)
- Color: Black
- Weight: 93g (No. 10), 74g (No. 8B)
$19.99
- CrMo headset with oversized 3/16" lower ball bearings, 5/32" upper bearings and an alloy top cover
- Mallet: External Cup, traditional
- S.H.I.S.: EC34/28.6|EC34/30
- Stack: 15.4mm/13.6mm
- Color: Black
- Weight: 150g
$20.99
Replacement headset bearings from FSA.
- Compatible with most Trek MTB integrated headset systems
- Sealed bearing for long life
- Compatible with Knock Block Headsets
$21.99
A new headset gives you a new lease on life. This is the upper part of an integrated headset for a 44mm headtube.
- Lower part of the headset sold separately
$25.00
FSA Standard Headset Bearings
$25.00
FSA bearings that set directly into the frame without the use of pressed in cups.
- 36/45 degrees is Cane Creek-compatible
- 45/45 degrees is Campagnolo-compatible
$25.99
- Weight: 160g
- Crown Race: 30
- S.H.I.S. Lower: EC34
- S.H.I.S. Upper: EC34
- S.H.I.S. Stem Clamp Diameter: 28.6 Threadless
$26.00 - $61.00
- Pig DH-Pro feature angular contact sealed upper bearing and an industrial cartridge sealed bearing with an alloy upper cup and CrMo lower cup
- Pig feature oversized 1/4" lower ball bearings, 5/32" upper bearings
- Big Fat Pig feature super oversized caged ball bearings
- Pig: External Cup, traditional
- Pig S.H.I.S.: EC34/28.6|EC34/30
- Big Fat Pig S.H.I.S.: EC49/38.1|EC49/40
- Pig DH Pro S.H.I.S.: EC34/28.6|EC34/30
- Stack: 15.4mm/13.6mm (Pig), 17mm/11.7mm (Big Fat Pig), 15.5mm/16mm (Pig DH Pro)
- Color: Black
- Weight: 193g (Pig), 345g (Big Fat Pig), 198g (Pgi DH Pro)
$32.99
Cane Creek compatible integrated style bearings fit directly into headtube.
- 36-degree inner chamfer and 45-degree outer chamfer
- Crown Race: 30
- S.H.I.S. Lower: IS41
- S.H.I.S. Upper: IS41
- S.H.I.S. Stem Clamp Diameter: 28.6 Threadless
$34.00
- Gyro compatible, 45/45 degree angular contact cartridge bearings, alloy crown race
- Impact: 45x45 degree Campagnolo Integrated
- S.H.I.S.: IS42/28.6|IS42/30
- Stack: 8mm/1mm
- Color: Black, Orange, Red
- Weight: 68g
$34.00
Replacement headset uppers from FSA
- Internal HS Upper Orbit-Z
- Steerer diameter: 1-1/8"
- ZS44/28.6 (36 x 45)
- 5.3/13.1mm
$40.99
A solid choice for 1-1/8in frames, the Orbit Equipe features a sturdy steel lower cup for maximum durability. The top cup is forged alloy, with an alloy top cover. Inside are two low maintenance, easy-to-replace sealed cartridge angular contact bearings.
- Bearing Type: Cartridge
- Weight: 117g
- Crown Race: 30
- S.H.I.S. Lower: EC34
- S.H.I.S. Upper: EC34
- S.H.I.S. Stem Clamp Diameter: 28.6 Threadless
$44.00
FSA ACR (Aerodynamic Cable Routing) Headsets are suitable for both road and MTB riding styles and feature angular contact bearings.
- A fully integrated cable routing
- No rotation limit
- ACR top cover
- Angular contact bearing
- Specific frame required
- 1.5" headtube
- 36°/45° ACB
- For 55.8mm OD headtube
- For 1-1/8" to 1.5" tapered fork
- Stack height 10.4+0.5=10.9
$47.00
The FSA Orbit Z headsets feature a very low-profile design primarily for ATB and are compatible with Cane Creek internal style headsets.
- "Zero-Stack"/Cane Creek compatible
- Very low profile designed primarily for Mountain Bikes
- Patented alignment tip for increased durability and performance
- TH brand 36-degree Micro Angular Contact Bearings (red seal)
- 7075 alloy crown race
- Laser etched aluminum top cap
$53.00
- Bearing Type: Cartridge
- Weight: 86 g
- Crown Race: 40
- S.H.I.S Lower: IS52
- S.H.I.S Upper: IS42
- S.H.I.S. Stem Clamp Diameter: 28.6 Threadless
$59.99
The FSA Orbit XL-II threadless headset features replaceable sealed cartridge bearings and an AL-7075 crown race.
- Forged and CNC machined 6061/T6 aluminum cups
- Patented alignment tip for increased durability and performance
- TH Brand 36-degree Angular Contact sealed bearings
- Laser etched aluminum top cap
$59.99
- Bearing Type: Cartridge
- Weight: 125g
- Crown Race: 40
- S.H.I.S. Lower: ZS56
- S.H.I.S. Upper: ZS44
- S.H.I.S. Stem Clamp Diameter: 28.6 Threadless
$69.99
FSA Orbit MX threadless headset features TH brand 36-degree angular contact sealed bearings.
- Forged and CNC machined 6061/T6 aluminum cups
- Patented alignment tip for increased durability and performance
- TH Brand 36-degree Angular Contact sealed bearings
- 7075 alloy crown race
- Laser etched aluminum top cap
- EC34/28.6 (36x36) | EC34/30 (36x36)
$69.99
The FSA Orbit X threadless headset is constructed of aluminum and features sealed cartridge bearings.
- Classic shape with modern styling for high-end road bikes
- For threadless steerers
- Forged and CNC machined 6061/T6 aluminum cups
- Patented alignment tip for increased durability and performance
- TH brand 36-degree Micro Angular Contact Bearings (red seal)
- Laser etched aluminum top cap
- Weight: 82g
$78.00
Cane Creek compatible integrated style bearings fit directly into headtube.
- Crown Race: 30
- S.H.I.S. Lower: IS41
- S.H.I.S. Upper: IS41
- S.H.I.S. Stem Clamp Diameter: 28.6 Threadless
$88.00
The FSA Orbit Z headsets feature a very low-profile design primarily for ATB and are compatible with Cane Creek internal style headsets.
- "Zero-Stack"/Cane Creek compatible
- Very low profile designed primarily for Mountain Bikes
- Patented alignment tip for increased durability and performance
- TH brand 36-degree Micro Angular Contact Bearings (red seal)
- 7075 alloy crown race
- Laser etched aluminum top cap
- Weight: 89g
$92.00
- Carbon fiber top cover
- Upper: Campagnolo angular contact bearings (black seal)
- 1-1/8-inch, 45 degrees/ 45 degrees ACB upper
- 1.5-inch, 36 degrees/ 45 degrees ACB lower
- For tapered 46mm/56mm OD headtube
- For 1-1/8-inch to 1.5-inch tapered fork
$104.00
- 1.5" / 1-1/8", 36°/ 45° ACB
- Fits 1-1/8" head tube and 1-1/8" to 1.5" tapered fork
- Fits tapered fork to standard 50mm OD head tube
- Upper: 36°/ 45° ACB (blue seal)
- Lower: 1.5" 36°/ 45° ACB (black seal)
- Alloy crown race
- Stack height 16.9+13.4=30.3mm
- 129 grams
$123.00
The FSA Orbit Xtreme Pro threadless headset is constructed of forged and CNC machined 7075/T6 aluminum cups.
- Stainless steel Angular Contact Bearings
- Stainless steel crown race
- 1.5'' patented alignment tip for increased durability and performance
- Deep Cup model has 22mm insertion of upper and lower cups
$24.99
New dust cap design, with Monogram laser etched logo, for a cleaner look to accommodate a taller riding set up with less spacers. Same quality as Odyssey's Pro Headset using high-quality sealed bearings and a precision tapered wedge to keep the headset tight at all times.
FEATURES
- High-quality sealed bearings.
- Color matched spacers included.
- 15mm dust cap. With 3mm, and 2mm spacers
- Laser etched Odyssey bearings.
SPECS
- Campagnolo standard spec.
- 1 1/8-inch integrated headset.
- 45º tapered bearings
- 41.8mm outer diameter (fits 42mm BMX head tubes).
$26.99
Designed using high-quality sealed bearings and a precision tapered wedge to keep the headset tight at all times.
FEATURES
- High-quality sealed bearings.
- Color matched spacers included.
- 10mm, 3mm and 2mm (15mm total)
- Laser etched Odyssey bearings.
SPECS
- Campagnolo standard spec.
- 1-1/8 integrated headset.
- 45º tapered bearings 41.8mm outer diameter (fits 42mm BMX head tubes).
$14.99
Lightweight aluminum alloy
- Non-Keyed
- Height: 20mm
- 10 to a bag
Page 1 of 3
Next page