Other

- Prevents chain derailment when shifting to inner ring - Adjustable hose-type clamp fits 1-1/8" to 1-3/8" seat tubes

- Aheadset preload adjusting bolt

All-City replacement bolts and adjustment springs for the Hennepin Bridge and Space Horse dropouts. - Sold as a pair; two bolts and two springs - M4x0.7mm thread - Length: 45mm

- Chromoly steel - CNC fabrication - 1.29" x 24tpi left hand thread

Consider this the cherry on top of your sundae. Pull the whole thing together with an All-City top cap. - Includes star nut

Snap-on brake cable guides for bikes that don't have any. - Steel cable housing guide for 1-1/8" top tubes - Snaps on; no bolts - Set of 3 clamps

Tired of losing your bar end plugs? Seeking a more secure solution that also venerates your favorite little bike company from Minneapolis? Well, boy howdy do we have just the thing...

This Service Kit from All-City Cycles includes a derailleur hanger, axle stud, and nut. The derailleur hanger is compatible with any frame out there, but you’ll need the included axle stud and nut for mounting to an All-City frame. - Alloy construction - Replacement derailleur hanger sold separately (Part Number DP0814) - Axle Stud and Nut are compatible only with All-City Space Horse, Gorilla Monsoon, and Cosmic Stallion Titanium frames

All-City Singlespeed Disc Brake Adaptor 

Pretty up your ride and secure your seatpost with the All-City Shot Collar seat clamp. - Laser-etched All-City logo - Aluminum body with stainless steel hardware

Designed specifically for All-City’s Cosmic Stallion Titanium Frameset, this Cable Port Service Kit helps guide internally routed housing through the frame. Compatible with a wide range of brake, drivetrain, and dropper post options, all the screws and plates required to configure your setup are included. - Aluminum hatch cover with stainless screws - All necessary screws and plates included

The All-City Master Dropout is a sliding dropout system consisting of replaceable dropout plates and fixing hardware. Designed for use with 12mm thru-axles and flat-mount brakes, it is compatible only with select All-City models. - Allows riders to convert from a geared to single-speed setup or vice-versa - Compatible only with select All-City models - No additional chain tension adjustment required - Threaded cap / nut for axle installation - Cap nut and O-ring included - Use with drive-side plates

- 90 degree

- Noodle/Boot completely seal brake cable, upgrades most linear brakes

- Includes stainless bolts - Fits 160mm front and 140mm rear rotors

Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)

- Includes stainless steel bolts - 40mm fits 200mm Front and 180mm Rear Rotors

- Ultralight, CNC-machined 6061 aluminum spacers for fine-tuning stem height - Includes one each: 3, 5, 10mm spacers and two each: 1mm spacers

Cold-forged and CNC machined from 6061-T6 aluminum alloy, Box One Fixed Seat Clamps are tough, lightweight, and exceptionally good looking. Featuring titanium hardware and laser-etched graphics, Box One Fixed Seat Clamps are available in anodized black, blue, red, and silver.

Box Two Quick Release Seat Clamps are cold-forged, and CNC machined from 6061-T6 aluminum alloy. Weighing in at just 27 grams/0.95 ounces in the 31.8 size, they are as lightweight as tough. The head of the quick-release lever and the face of the clamp are given a proprietary low-friction surface treatment that ensures smooth lever action for the life of the clamp without the need for a bushing. Meets or exceeds ENM standards.

Box One 7075 Alloy Chainring bolt kits include five 8.5-mm front bolts, five 6-mm front bolts, and five 5-mm rear nuts, so they will fit just about any chainring/crank combination, including those with threaded holes.

- CNC-machined 6061-T6 aluminum with titanium hardware - Zero-friction cam surface treatment ensures smooth lever action - 31.8mm - 27g

- KlickFix bracket for use with all Basil handlebar bags requiring a KlickFix adapter - Easily & quickly removable - Suitable for handlebars measuring 22mm to 31.8mm - Made form composite materials - Adjustable angle

- Soft foam grip donuts prevent thumb blisters from riding gloveless - Intended for use with flanged BMX grips to prevent rubbing and irritation

- Allows the use of two separate cables running from detangler to brake for more precise adjustment and better feel - Attaches to rear cable guide and routes two cables around seat post

- Alloy 1-1/8" seatpost clamp - Single bolt

- Economy level forged alloy seat post clamps for BMX and cruiser bikes with 1" / 25.4mm seat posts - Clamp Size: 25.4mm - Material: Alloy

- Cable hanger and straddle cable - Alloy construction - Anodized finish - Great for Canti and U-Brakes

- Alloy top cap with hollow bolt to allow for brake cable pass-through - ED black durable finish - Size: 1-1/8"

- Alloy 1-1/8" seatpost clamp - Double clamp design for extra holding power on BMX bikes