Filter By:
Parts & Accessories
$59.95
Being elite means making no compromises when pursuing perfection...everything matters. Mounting your gear in a position to minimize drag is just one tip for performance. The Tri-BackUp Elite is specifically designed for saddles with angled rear rails.
- Material: CNC aluminum
- Hydration Capacity: One or two bottles (up to 750cc each)
- Compatibility: Ninja TC Road, Ninja Pouch+ Road Ninja CO2+ Tri-Cage series
- Mount: V rail section of saddle Compatible with CrMo, Ti, & Carbon rails
- Max Load: 2.5 kg / 5.5 lb
- Added Features: 1 Micro AirBooster and 2 16g CO2 cartridges included
- Angle adjustable
- Size: 8.6 x 7.6 x 7.4 cm / 3.4” x 3” x 2.9”
- Weight: 102 g / 3.60 oz (Total) 88 g / 3.10 oz (w/o Inflator Bracket)
$32.00
Osprey's Hydraulics LT 1.5L Lumbar Reservoir by Hydrapak is made for those who prefer an off-the-shoulder hydration solution. Designed to fit in most lumbar packs, but perfectly pairs as an extra or replacement reservoir for Osprey's Seral lumbar mountain biking pack. Twin-welded chevron baffles stabilize the water and maintain a flat profile. Thoughtful design makes filling, cleaning, and—most importantly—staying hydrated on the trail easier than ever. All parts are BPA-free, phthalate-free, lead-free, guaranteed. All materials are certified food safe according to FDA and EU regulations.
- Twin-welded chevron baffles stabilize the water and maintain a flat profile
- Easy Slide-Seal top opening, seals watertight and provides wide access for easy filling and cleaning
- Magnet clip attaches to the reservoir hose and pairs with the included sternum strap magnet for easy water access and hose management
- Hydrapak Blaster bite valve offers fast, smooth water flow with a 1/4 twist on/off switch
$32.00
Osprey’s Hydraulics LT 1.5L Reservoir by Hydrapak is made for light and fast activities where weight and balance are critical. Twin-welded chevron baffles stabilize the water and maintain a flat profile. The streamlined design allows for easy loading into internal hydration sleeves. Thoughtful design makes filling, cleaning, and most importantly, staying hydrated on the trail easier than ever. All parts are BPA-free, phthalate-free, lead-free, guaranteed. All materials are certified food safe according to FDA and EU regulations.
$4.99
5-serving polyethylene gel flask
- High-density polyethylene with molded finger grips
- Secure cap to keep dust out
- Easy to clean
- Holds five Hammer Gel servings
- 2.25" x 5.75"
- 5.82oz / 172.11 mL
DESCRIPTION:
An economical and efficient way to carry Hammer Gel, Perpetuem, or Sustained Energy.
Easy to clean, this flask is dishwasher safe (top rack).
$9.99
Clamp your water bottle cage securely to your handlebars with Electra's Bottle Cage Adapter. Easy installation and universal bottle cage compatibility make this accessory a no-brainer.
• Allows for the installation of bottle cages on bicycles without frame mounts
• Mounts to handlebar
• Bottle cage sold separately
$19.99
CamelBak's Antidote Cleaning Kit keeps your hydration system clean and free of nasty tastes and odors. It includes two brushes: a tube brush for scrubbing the full length of the delivery tube and an effective, corner-reaching reservoir brush. Plus, the two Cleaning Tablets work in just 5 minutes to thoroughly clean your reservoir. Extra drying arms lock the reservoir open and you get a Reservoir Dryer that clicks into your bladder, letting it drain and dry after you've cleaned it.
$6.00
CamelBak's Big Bite Valve mouthpiece offers hands-free hydration and is ideal for any application. And, it's remarkably drip resistant.
$6.00
CamelBak's Big Bite Valve Cover keeps your bite valve clean. Put it on your valve for storage or while traveling and your bite valve will stay just the way you left it.
$12.00
Keep your reservoir free from taste and odor and ready for your next adventure. Fast-acting tablets are easy to use and work in just 5 minutes.
- Periodic cleaning with CamelBak Cleaning Tabs keeps reservoir and tube free from taste and odor
- CamelBak Cleaning Tabs work in just 5 minutes for a thorough cleaning
- 8 Cleaning Tablets Per Pack.
$33.00
The Crux delivers 20% more water per sip, with an ergonomic handle for easier refilling, and an on/off lever that makes it easy to prevent leaks.
- Offers 20% more water per sip
- Leak-proof cap is easier to open and close
- On/off lever lets you seal your drinking tube shut with one hand
- Hydroguard technology inhibits the growth of bacteria in the reservoir and tube
- Big bite valve self-seals after each drink, eliminating annoying drips
- Dimensions: 38 x 19 x 6 cm / 15 x 7.5 x 2.5 in
$35.00
- Offers 20% more water per sip
- Leak-proof cap is easier to open and close
- On/off lever lets you seal your drinking tube shut with one hand
- Hydroguard technology inhibits the growth of bacteria in the reservoir and tube
- Big bite valve self-seals after each drink, eliminating annoying drips
- Dimensions: 46 x 23 x 8 cm / 18 x 9 x 3 in
$5.99
CamelBak's Ergo HydroLock controls your fluid flow with the flip of a switch. Turn it on to drink, turn it off for added security during transport. Simply insert it into the end of your CamelBak drinking tube and attach the valve to the other end. Plus, the 90-degree bend makes sipping on the go a cinch!
$8.00
New design ensures unrivaled fitness and cycling performance with proven hydration functionality.
$20.00
The all-in-one tool kit for faster cleaning and drying of your CamelBak Crux reservoir.
$104.95
The Delta 425 is among the lightest and stiffest, adjustable single rear bottle carriers on the market. Compatible with ISM saddles. The Delta 425 mounts to the saddle rails and hides in the body's draft. Angle and height are highly customizable for that perfect fit. It includes a tight-gripping Gorilla XT carbon fiber cage for a secure hold.
$140.95
Introduction
- Our Hydration and Repair carriers have often been copied, but like any copy, it is never as good as the original. With over a decade of experience designing these carriers and winning more Ironman Distance World Championships than all our competitors combined, we have launched the first of the next generation of Alloy XLAB Hydration Carriers. This new 'wing' will be on winning race rockets for the next several years.
- Rear carriers should not interfere with the air on the rider's back, but instead fill in the turbulence 'hole' behind the riders posterior, thereby reducing the rider's drag (which accounts for 64% of energy used on a racing bicycle). We positioned the carrier in the Wind Tunnel to 'draft' behind the rider causing no extra drag.
Storage
- We wanted the next generation of carriers to solve the problem of storing keys, cell phones, cash, tire levers, and other essential items. These and other items can be stored in the XLAB MINI BAG which drops vertically and easily into the integrated compartment and is secured by the top X-STRAP.
- As you can see, you have two choices for storing your Air Strike CO2 cartridges and NANOFLATOR, or XLAB SPEED CHUCK on the rear of the CARBON WING, using the optional hexagonal X-NUT or in the XLAB MINI BAG.
- Tires and tubes are always an issue, so now you can attach them neatly under the CARBON WING inside the XLAB MEZZO BAG.
Hydration
- With the CARBON WING you can use a single Aqua Shot bottle cage on the rear or one on each side. XLAB recommends using either the GORILLA cage or the GORILLA XT cage for rear carriers.
Adjustable Mounting
- One of the key features invented by XLAB is the multiple mounting holes for the saddle rail clamps. One position sets the bottle cages close to vertical and others incline the cages for rider preference. Because of it's past success, we have kept the same feature in the XLAB Super Wing for customizing the installation.
- In addition, there are 4 sets of holes for the lower cage bolts which with the front holes provides a total of 12 different cage angle positions.
Lightweight
- We use the latest aerospace aluminum alloy to provide the toughest alloy carrier on the market with no twisting like other hydration carriers. Without hardware the XLAB Super Wing weighs only 85 grams.
Bottom Line
- The bottom line—simply the most versatile Alloy Hydration and Repair system carrier, complete with mounting hardware. XLAB makes you faster – ask the Pros!
Includes:
- Carbon Sonic chassis
- One Pair X-Straps
- All hardware and instructions
Material
- Carbon Fiber proprietary unidirectional orientation.
Weight
- Chassis 49 grams, Hardware 30 grams. Total 79 grams
Limited Lifetime Warranty
- Because of our engineering and testing for this product we give it a Limited Lifetime Warranty to the original owner.
$42.95
Aluminum BTA hydration mount compatible with Torpedo Versa (sold separately). Pre-drilled front mounting holes for Torpedo Versa or aero computer mounts.
- Adjustment Width: 75-150mm
- Construction (Plate): 6061-T6 Aluminum
- Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip
- Weight: 1.9oz (55g)
$83.95
XLAB's Turbo Wing Rear Carrier delivers options galore so you can easily attach bottles, a bag, CO2 cartridges, and everything else you need for any length ride, and keep it all neatly tucked behind you, out of the wind. There are also 15 different mounting options and you can keep it upright for low drag or invert it for easy access. Plus, it's made of light, strong aluminum, which means there's no twisting under load, no swaying while riding and no bouncing or lost bottles over bumps.
$7.95
- Perfect finishing touch to a bike built
- 7075-T6 aluminum
- M5 x 15mm
- 4Nm max torque
- For water bottle cages only.
- Never use these aluminum bolts in a structural application.
$12.00
Our lovely VO bottle cage mount allows you to affix water bottle cages on your handlebars. They are made of extruded aluminum and are intended for city bikes, so they fit bars up to 25.4mm. The mount comes with the two bolts needed to attach the cage to the mount
(Some riders will want to use them on the 26mm "sleeved" road bars. In that case you'll need to file just a touch off the top edge of the "hinge" section so it opens a liitle wider. Of course, it's no problem to use them on "bulged" road bars.)
$59.95
Saving time wherever possible is important to a triathlete and the Tri-Backup Pro V aids by mounting to the “V” section of your saddle to form a rear saddle hook helping to minimize T1 and T2 times. This sturdy rack also provides multi-combo capabilities to customize equipment for any race needs.
- Material: Pressed aluminum
- Mount: V rail section of saddle Compatible with CrMo, Ti, & Carbon rails
- Hydration Capacity: One or two bottles (up to 750cc each)
- Max Load: 2.5 kg / 5.5 lb
- Compatibility: Tri-BackUp Air Station, Tri-BackUp TubeBag, Tri-BackUp TireBag, Ninja TC Road, Ninja Pouch+ Road. Ninja CO2+ Tri-Cage
- Added Feature: 2 angle positions
- Size: 11.8 x 8 x 6.9 cm / 4.6” x 3.1” x 2.7”
- Weight: 97 grams
$11.95
Versatile mount for additional water bottle cage or other accessories. Band style clamp provides easy installation and flexible mounting options.
- Fits tubes 20 - 60mm
- Engineering grade polymer
- Max load: 1.5 kg / 3.31 lb
- 26 g / 0.92 oz (2 pcs)
$17.99
- Handlebar cage mounting bracket allows any bottle cage to be firmly attached to handlebars
- Compatible with handlebars from 22mm to 36mm
$34.95
The BO-6 is a premium bottle opener modeled after our iconic PW-4 pedal wrench, with two offset wrench openings for optimal mechanical advantage and a long vinyl-dipped handle for maximum leverage. Made in the USA from laser-cut 304 stainless steel for a lifetime of use.
$8.95
Make quick work of any bottle-cap-removal operation with Park's BO-2 Bottle Opener. This ergonomic tool is made of stainless steel with a comfy vinyl coating.
$7.95
Park Tool's Mini Bottle Opener is made of durable, rustproof stainless steel and has Park's great-to-grip and attractive blue vinyl-coated handle. This handy tool fits on a keychain and has a bottle opener and 10mm open-end wrench built in.
$10.00
Featuring a three-color Park Tool logo and "bike wrench" graphic, Park Tool's Pint Glass is made from heavyweight, dishwasher-safe glass.
Page 1 of 2
Next page