Cranksets

Many top features are packed into the Centaur crankset. The four-arm design allows for independent bolt circles, offering greater stiffness and structural integrity, and also provides additional versatility, as a single crankset is compatible with both standard compact and semi-compact chainrings. Add these features to the first aluminium crankset with an Ultra-Torque axle and the result is a component that is very similar to the top-of-the range part. - Requires use of Ultra-Torque bottom bracket cups-Double standardized bolt circle diameter allows for use of standard, mid-compact and compact chainrings - Ultra-Torque axles couple together in the middle of the BB shell via a Hirth Joint that self centers the crank. This results in a very light weight and stiff system that transfers power to the pedals without power loss - Features Campagnolo X.P.S.S. (eXtreme Performance Shifting System) featuring geometrically optimized chainring teeth. Optimized when mated to a full Campagnolo drivetrain - Ultra-Torque system have both drive and non-drive side bearings pre-installed

Revamp the look of your single speed cranks with some new hardware. Origin-8's Single Chainring Bolts give a high polished look to any crankset. The anodized finish comes in multiple colors to highlight your crank and makes it look as good as you do. You can also choose between steel or aluminum bolts. • Set of 5 male/female bolts • Inside measures 4mm when tightened, 7mm total height

- Compatible with 1/2" pedals - Forged steel - 24 TPI

- 8-speed Road crankset - Square taper interface - Does not include BB - Bolt pattern: 110 x 5-bolt - Crank length: 170mm

• 6/7/8-speed MTB crankset • Square taper interface • Coated steel arms/riveted steel chainrings • Includes plastic chainguard • Does not include BB • Weight: 1465 grams

The Shimano 105 double crankset balances weight and efficiency without sacrificing stiffness. It offers Rider Tuned performance with numerous gear combinations, and the wider gear pitch increases chain clearance with small gearings and allows for as short as 410mm chain stays. - Hollowtech II construction - 11-speed - 110mm Shimano Asymmetric BCD

SRAM's Rival 22 performs on par with more expensive cranksets, but at a bargain value. The crankarms are hollow and forged from 6066 aluminum for maximum strength with minimum weight. Because lightness is nothing without toughness, the Rival crankset proudly boasts SRAM's X Glide R chainrings that are specifically designed for use with the Yaw front derailleur. Durability and reliable shifting are your allies with Rival 22.

Trail riding can be tough on your gear. The ends of your carbon cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips! Compatible with: - Race Face - Next SL Cinch (G3) - Sixc Cinch - Chester - Respond - Next/Next SL (24mm Spindle) - Sixc (24mm Spindle) - Most other popular carbon MTB cranks and assorted alloy DH cranks

- Forged steel - 24 TPI

Some riders test their limits more than others. For these riders, the GX Eagle DUB crankset allows them to go all in, every day they ride. The best aluminum crankset we make, engineered to deliver consistent performance every ride. Featuring our X-SYNC 2 tooth profile chainring for complete chain control, each tooth's thickness is toleranced and controlled to work seamlessly with the chain's inner and outer links. DUB technology's patented spindle design and bottom bracket provide a uniform approach to fitment, better sealing, and forward and backward compatibility. Simply put, the forged aluminum GX Eagle DUB crankset is the no-frills choice of riders who know. - Our best aluminum crankset - Direct mount interface compatible with chainrings across the entire Eagle Ecosystem - Master GX colorway as part of Eagle Colorsystem—pairs with all cassettes and chains, from Black to Gold to Rainbow to HardChrome and all-new Copper

- Steel chainring with forged alloy crank arms and double chainguard - Compatible with 3/32" chains - 45mm chainline - Spindle Type: 118 SQR JIS

Shimano Ultegra R8000 crankset. - Optimized lightweight crank arm design produces excellent power transfer efficiency - Minimized weight without sacrificing stiffness - Hollowtech II - Rider tuned gear performance through various gear combinations - Possible to choose the best choice for ride - Redesigned FC for greater frame compatibility - Wider gear pitch increases clearance between chain and leading teeth to provide compatibility with frames with O.L.D. 135mm and 410mm chain stay length - Model Number : FC-R8000 - Series: Ultegra - Crank Construction: Hollowtech II - Crank Arm Length : 165, 170, 172.5, 175mm - Bottom Bracket : SM-BBR60/SM-BBR60-PB - Chain Line: 43.5 - Average Weight: 690 grams (53-39T), 681 grams (52-36T), 674 grams (50-34T), 668 grams (46-36T)

The crankset is the heart of your bicycle and where you’ll find the SRAM RED Quarq power meter. The sole job of the crankset is to convert the effort from both legs to forward motion. It is the perfect place to measure power. This power meter works for every discipline: Road, triathlon, time trial, and cyclo-cross. The chainrings are replaceable should your bike, discipline, or ability change. - A direct force power meter that measures total power output from both legs with +/-1.5% accuracy - Works for every discipline: Road, triathlon, time trial, and cyclo-cross - No compromises on materials, shifting, wheels, or pedal choice - Proven by pro teams and athletes throughout the world – Cobbled Classics, Giro d’Italia, Tour de France, Vuelta a España, World Championships - Number 1 at the Ironman World Championship for the last three years - Uses a hidden bolt to mount the chainrings – compatible SRAM chainrings ensure the derailment pin lines up behind the crank arm - 10K – programmed with over 10,000 data points to eliminate temperature effects on power measurement - AxCad – A multi-axis accelerometer switches the power meter on and measures cadence, simplifying installation and operation - Breakthrough Materials – Exogram hollow carbon fiber crank arms – the lightest, strongest crank arms SRAM makes – minimize weight and maximize speed [ELSA RS, ELSA R and SRAM RED] - Easy to use (and reuse) – LED indicator and visible ANT+ ID - The replaceable CR2032 battery never leaves you without power - Manual and automatic zeroing make it truly set and forget - Built to Last – IPX7 waterproof rating, 2-year warranty, free firmware updates, and acclaimed international support - Moves with you from bike to bike - With Quarq's free Qalvin app – available for Windows, Mac, iOS and Android – you can set the zero offset, check battery voltage, run diagnostics, and perform firmware updates for free Arm Material: Carbon arms, Machined alloy spider Weight: 778 grams (GXP 172.5mm 53x39 BB not included) * Chainrings and BB sold separately

Origin-8's Pro Pulsion Alloy Road Crankset is made of light and durable forged aluminum with 53-/39-tooth CNC-machined aluminum chainrings. This fine 9 speed-compatible crankset provides excellent power transfer and smooth shifting.

- Stiff oversized hollow-forged aluminum arms for frames with PF30 or BB30 BB shell - Innovative Praxis 35mm external bottom bracket and oversize aluminum spindle - Includes an aluminum BB30/PF30 bottom bracket with precision sealed bearings

- Single speed crankset - Forged AL6061-T6 alloy crankarms - Includes 46 tooth alloy 3/32" chainring - 42mm chainline with 103mm JIS BB - BCD: 130mm - Weight: 620g - Does not include JIS square taper BB

Shimano Dura-Ace Left Crank Arm. - Spindle Interface Type: Hollowtech II

The STYLO Carbon DUB crankset is for riders who feel most at home when riding endless single track. Built tough, to handle lines through rock gardens and trail, the new STYLO Carbon is strong, stiff and light. Featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. DUB-powered cranksets mean simplicity, compatibility and durability. - SRAM DUB technology creates a lighter, stiffer and stronger crankset - Proprietary carbon layup technology - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB compatible bottom bracket sold separately - Fully compatible with any 1x drivetrain - BB Included: No - Chainring BCD: Sram Direct Mount - Crank Intended Use: Mountain - Number of Chainrings: Single - Drivetrain Speeds: 12, 11, 10 - Spindle Interface Type: SRAM DUB - Chainline/Hub Compatibility: 141/148 Boost Hubs

The SRAM GX Eagle DUB Fat Bike crankset delivers consistent performance every time out. Now featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. Optimized 7000-series forged aluminum arms support the X-SYNC 2 chainring to provide complete chain control. Now everyone can benefit from a new measure of durability. - SRAM DUB technology creates a lighter, stiffer, and stronger crankset - Optimized 7000-series forged aluminum arms - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB-compatible bottom bracket sold separately - 66.5mm chainline

- Various choices for bike and riding style - More durable chainwheel teeth - New 3D composite chain ring's teeth composition is optimized for each chainwheel load out (1x11, 2x11 & 3x11) with steel driving gear teeth and aluminum support gears - Improved driving rigidity - Loose ratio gear combination for minimum shifting gap and maintaining rhythm - Enhanced chain retention - Better sealing and better rotation - Model Number : FC-M8000-2 - Series : DEORE XT - Cassette Compatibility : 11 - Bolt Circle Diameter : P.C.D. 96/64mm - Crank Arms : HOLLOWTECH II Technology - Bottom Bracket : BB-MT800 / BB-MT800-PA - Chain Line : 48.8mm - BB Shell Width : 68, 73mm

The SRAM RED 1 AXS crankset features exceptional 1x drivetrain design. It provides the simplicity and tighter gearing range that is well-suited for road racing and riding in flatter terrain, where a wide range would go unused. The crankset is designed specifically for electronic shifting and can be upgraded to a power meter. - Single-ring drivetrain simplifies functionality and reduces weight - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control

Calibur V2 Spindle replacement parts

The SRAM RED 1 AXS crankset features exceptional 1x drivetrain design. It provides the simplicity and tighter gearing range that is well-suited for road racing and riding in flatter terrain, where a wide range would go unused. The crankset is designed specifically for electronic shifting and can be upgraded to a power meter. - Single-ring drivetrain simplifies functionality and reduces weight - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control

Riders want more range and closer steps between gears—and that’s the driving design principle of the SRAM Force crankset. It offers smaller chainrings with a consistent 13-tooth gap between size variants, delivering smooth, accurate, and dependable shifting for the modern rider. Always find the sweet spot. - X-Range gearing technology gives you more range and a smoother gear progression, so you’re always in the right gear - Crisp and accurate front shifts - DUB bottom bracket adds durability and simplicity - Can be upgraded to a power meter

The SRAM carbon GX Eagle crankset delivers consistent performance every time out. Featuring SRAM's X-SYNC 2 tooth profile chainring, the Carbon GX crankset is engineered for complete chain control. Each tooth's thickness is precisely toleranced and controlled to work seamlessly with the chain's inner and outer links. DUB technology features a better-engineered bottom bracket and a new spindle design. Together, these allow for a more uniform approach to bottom bracket fitment, better sealing against contamination, and forward and backward compatibility. Now everyone can benefit from a new measure of durability.

Pedal-heavy outings with rowdy all-mountain shredding can be very demanding on cranks. The Next R CINCH Crankset is light and strong where it matters most. Racing time or just rallying with friends, feel free to get a bit more sideways with Next R. - Manufactured from UD Carbon with matte clearcoat - Cinch technology for game-changing compatibility - Includes 30mm spindle, for 68/73mm BB shells

Shimano's R9100 series crank arm achieves the ultimate in optimal power transfer. It does this through a broad Hollowtech II arm which sets the highest standards for stiffness and lightness. - Spindle Interface Type: Hollowtech II

The Box Three Crankset features a hollow-forged 2-piece design with an oversized bottom bracket interface. The 24mm spindle is pressed into the drive-side crank arm for durability and easy installation. The non-drive side crank arm features a 2-bolt pinch system for added strength. Our unique 4-bolt 104 BCD spider features a flex-resistant ring for optimum performance. Box Three Cranks feature steel pedal inserts that require pedal washers and externally sealed bearing BSA bottom brackets, both provided in the box. FEATURES - Hollow Forged Design - Dual Pinch Bolts for Even Clamping Force - Spider with Flex-Resistant Ring COMPATIBILITY - Box Two Chainring - Box One Chromoly Chainring Bolts - Box One 7075 Alloy Chainring Bolts - Box Two 24mm bottom bracket - Box Extremum RacePrep bottom bracket

The new Super Record 12x2 Speed crankset: an intense concentration of innovation that results in the greatest possible stiffness and precision in derailing, whilst providing a dedicated aerodynamic “super design." The new carbon fiber Super Record 12x2 Speed crankset has been made lighter on the inside through Campagnolo Hollow Technology, which uses the Ultra-Torque bracket system with a titanium axle to transfer all of the force the athlete applies to the pedal to the drivetrain. The new Super Record 12x2 Speed crankset can be installed on any type of frame, whether or not it is being used with disc brakes because it optimizes the chain line on the frame with a rear hub flange measuring 130, 135 or 142 millimeters, without affecting the Q factor, which remains constant at 145.5 millimeters thanks to the new hand crank design. The use of ceramic Cult bearings leads to obtaining the smooth ride that the Campagnolo brand is known for. The innovative design of the outer chainring ensures faster, quieter derailing owing to the contoured pin. The symmetrical design of the inner chainring teeth allows improved stability with chain crossovers. The double wheel sizing standards (112 and 145 millimeters) combined with the eight fixing screws, optimize weight and stiffness through the increased use of carbon fiber. The varying number of pins for each of the three chainring combinations (34/50, 36/52, 39/53) facilitates upshifting due to the optimized free strokes associated with each combination. The special drains on the inside of the outer chainrings optimize performance when downshifting in dead spots.

Every innovation in Quarq's DZero platform represented the 10+ years of Quarq's advances in power meter technology. This same platform is now combined with XX1 Eagle DUB CARBON TUNED crankset—lightest, stiffest, and strongest to date, and X-SYNC 2 chainring—providing significantly quieter performance with better mud clearing and extraordinary durability. Ready to power every ride. - Bluetooth low energy technology and ANT+ wireless data transfer - MagicZero: automatically checks and recalibrates your power meter as you ride (no need to manually calibrate) - AxCad: no cadence magnet required - 10K Temperature Compensation - Battery: CR2032, 200-hour battery life, change without tools - OmniCal: swap chainrings without affecting accuracy - 2-year warranty - IPX7 waterproof rating - Accuracy: within 1.5%, measuring both legs