Filter By:
Riser
$220.99
- Full UD carbon construction
- Textured surface at bar clamp and grip areas
- 35mm oversized clamp diameter
- 800mm width
- 7° back sweep
- 5° upsweep
- ISO-Mountain safety certified
- 225g
$220.99
- Full UD carbon construction
- Textured surface at bar clamp and grip areas
- 35mm oversized clamp diameter
- 800mm width
- 7° back sweep
- 5° upsweep
- ISO-Mountain safety certified
- 225g
$203.45 - $219.95
- The FatBar Carbon is the ultimate DH race handlebar.
- This ride-tuned handlebar combines the ultimate blend of strength, stiffness and shock absorption.
$219.95
- The FatBar Carbon is the ultimate DH race handlebar.
- This ride-tuned handlebar combines the ultimate blend of strength, stiffness and shock absorption.
$203.45 - $219.95
An ideal handlebar for riding anything from all mountain to downhill, Renthal's FatBar Carbon handlebar combines a blend of strength, stiffness, shock absorption, and weight savings.
- Uni-Directional carbon construction
- Ride-tuned to provide an ideal combination of stiffness and shock absorption
- Increased center section width for fine-tuned flex characteristics
- Downhill and twin crown fork compatible
- Permanent graphics, set-up grid and cut marks
$219.95
- The Fatbar Lite Carbon 35 is the ultimate light-weight, trail-proof handlebar.
- Designed for Trail, Enduro and XC riders and racers, the Fatbar Lite Carbon 35 is the clear market leader in terms of weight, strength, stiffness and most importantly, ‘rid
$210.00
Occupying a class all its own, our Winston Handlebar is a performance carbon mustache bar loaded with versatility and flare. Featuring a 25mm rise and 73-degree backsweep, it offers compatibility with road, mountain, and bar-end controls. Pretty enough to punch up commuter rigs and sport touring bikes alike, it's built tough to handle everything from rough, off-road conditions to long rides in the country. Comfortable in both the drop and riser positions, the unique and multi-functional Winston is sure to inspire upgrades and eye-catching custom builds.
- Compatible with road, mountain, and bar-end controls
- Tested to ASTM 3
- 90mm clamping area to fit Salsa Anything Cradle
- Can be ridden in up or down position
- Unidirectional carbon fiber construction
- Weight: 250g
$199.95
The WCS Carbon Logic-E Rizer bar ties together Ritchey's historic mountain biking heritage with the demands of today's modern electronic drivetrains. Designed to accommodate the internal routing of Shimano EW-SD50 wires for either Shimano Di2 or STEPS systems, this bar is built to be light and compliant for incredible durability and a supple, refined ride. The WCS Carbon Logic-E Rizer is the choice for XC riders looking for a high-end carbon eMTB bar that's built for performance. The WCS Carbon Logic-E Rizer features Ritchey's proven WCS carbon technology in a 15mm-rise bar with a textured stem clamp area to reduce the risk of bar slippage.
- Material: carbon fiber
- Width: 780mm (cutting not recommended)
- Rise: 15mm
- Backsweep: 9°
- Upsweep: 3°
- Clamp diameter: 31.8mm
- Bar-end compatible: no
- Weight: 175g
- Electronic compatibility: Shimano Di2 / STEPS (Shimano EW-SD50 cable—internal routing)
- For proper assembly, stems with open faceplates are required, such as the Ritchey C220 Trail.
$190.00
Simply put, it's the perfect trail bar. The M6 bar is tuned for the dream combination of response, compliance, and high strength. Available in a traditional 25mm rise or a low 7.5mm rise, it sweeps back at 9 degrees and up 5 degrees, providing excellent support and a classic fit. Designed around a 31.8mm clamping diameter, the carbon laminate is tuned to deliver the ideal flex profile for trail use. This bar provides excellent vibration damping and response, making it the perfect choice for long days on epic terrain.
- Material: Carbon Fiber
- Weight: 200g (25mm rise); 190g (7mm rise)
- Bar Width (Max): 780mm
- Bar Width (Min): 740mm
- Clamp Diameter: 31.8mm
- Sweep: 9 Degrees
- Tip: 5 Degrees
- Torque Spec: Face Plate: 5.5Nm
- Torque Spec: Controls: 5.5Nm
$190.00
An exceptionally strong carbon fiber 35mm riser bar that’s built to descend. The M7 bar is designed for the most aggressive and demanding riders. Carbon fiber is the ideal material for a gravity bar because fiber orientation and bar shape can be controlled independently and developed in unison, resulting in a tuned flex profile that cannot be achieved with aluminum. This bar is tuned to be precise and responsive while absorbing fatigue-inducing chatter and taking the sting out of the biggest hits. The M7 bar features a trail-perfect 8-degree backsweep and 4-degree upsweep for your long-travel 29er, enduro race bike, or downhill machine.
- Material: Carbon
- Weight: 230g (10mm rise); 240g (25mm rise); 245g (40mm rise)
- Bar Width (Max): 800mm
- Bar Width (Min): 780mm
- Clamp Diameter: 35mm
- Backsweep: 8 Degrees
- Upsweep: 4 Degrees
- Torque Spec: Face Plate: 5.5Nm
- Torque Spec: Controls: 5.5Nm
$188.99
A 35mm OCLV Carbon handlebar that adds strength, saves weight, and maintains compliance on rugged MTB trails.
Pin it to win it
The Line Pro Carbon MTB Handlebar adds strength and saves weight. This trail-tough bar has an oversize 35mm diameter, and it's built with OCLV Carbon so it's strong enough for even the most demanding trails and compliant enough for comfort on long descents and rugged terrain.
Product details
- Pro-level quality handlebar in oversize 35mm clamp diameter offers increased strength and minimal weight
- 15mm and 27.5mm rise options to dial in the perfect hand position
- Brake and shifter lever position lines for spot-on control set-up
- 40mm of cut marks on each side for easy width customization
- OCLV Carbon construction is the benchmark for durability and light weight
$187.00
- Unidirectional carbon fiber riser bar with 35mm stem clamp area
- Downhill strength with 25% weight savings compared to aluminum
$186.99
- Full UD carbon construction
- 31.8mm clamp diameter
- 9-degree back sweep
- EN-Mountain safety certification
- Upsweep / Drop: 4-degree
- Back Sweep / Bend: 9-degree
- 200g
$184.99
- Features PFL (Plastic Foam Lamination) manufacturing
- PFL utilizes tiny particles and steam pressure in the lamination process to expand and shape the structure of the bars
- The process uses less excess resin and fewer plys, resulting in a 15% lighter bar
$184.99
Race Face's flagship carbon DH rated handlebar just got wider. With the push to 820mm the new Sixc 35 handlebar gives unprecedented control at high speed, just what you need for UCI DH races, high speed park laps, or that next challenging AM adventure. Featuring Race Face's tried and true sweep design to get you in the attack position on the bike and uses their UD carbon wrap that gives the Sixc 35 strength you can believe in at a mind numbing 235g. Save weight and gain control? You just lost an excuse…
- Manufactured from UD Carbon with matte clearcoat
- Carbon optimized flex for improved small bump compliance
- Gold Standard of DH is now wider and stronger
- 820mm width for maximum control
$179.99
The Next R handlebar features 800mm of premium unidirectional carbon with the shred-ready positioning of Race Face's SixC bars. DH strength and Enduro weight for when you really need to lean into it.
- Manufactured from UD Carbon with matte clearcoat
- Carbon optimized flex for improved small bump compliance
- 35mm bar diameter for incredible strength/weight ratio
$179.99
XC riding is changing – Bikes, trails and riders are all progressing and pushing boundaries. Our new Next SL bar was designed to reduce rider fatigue without compromising handling. This bar allows good vertical flex for comfort, while also eliminating bad horizontal flex to improve steering precision.
$165.00 - $172.00
Mountain bike terrain is bigger and burlier than ever, so why shouldn’t your components be? Our Guide 35.0 Carbon handlebar increases front-end strength and stiffness for more precise handling inputs. The carbon fiber construction keeps weight to a minimum and soaks up trail chatter. Pair these carbon mountain bike handlebars with our Guide Trail 35.0 Stem and carve, drop, pump, and jump your way down the mountain with confidence.
- Bar Clamp Diameter: 35.0mm
- Color: Carbon
- Width: 760/800mm
- Rise: 10/20/40mm
- Back Sweep (deg): 8 degree
- Upsweep: 5 degree
- Material: Carbon
$165.00
The No.9 35.0 Mountain Carbon Handlebar is designed and built for the most extreme trail and all-mountain riding. The oversized stem clamp adds to front-end stiffness for precise input, while the carbon construction provides vibration damping in a lightweight and durable package.
- Unidirectional carbon fiber construction
- 35mm stem clamp
- 8 degrees of backsweep with 5 degrees of upsweep
- Trimmable ends, made easy with graphic markings
- Rated to ASTM Condition 4 for extreme off-road riding
$145.00 - $151.00
Whatever your adventure, Rustler handlebars are tough, durable, and comfortable. Whether you are out exploring a new trail or devouring your favorite descent, they’ll help keep you in control and ready for the terrain ahead.
- Signature 11° back sweep, 6° up sweep, 20mm rise
- 800mm and 750mm width options
- Graduated lines for easy trimming
- 31.8mm clamp diameter with 160mm width for use with Salsa Anything Cradle and aerobars
- Weight: 221g
- Note: Rustler bars are not compatible with bar ends
$146.60
- Light enough for XC, but strong enough for Enduro and Trail
- Carbon composite construction
- Reinforced and textured clamping areas, with markers for accurate shortening
- 5/8 degree with +10mm setback
$123.10
The SL-K Riser Bar is the ultimate mix of light weight and strength for a handlebar that is designed for all types of riding. Its CSI (Carbon Structural Integration) construction marries the best of both worlds of carbon and aluminum. The carbon helps keep the vibration to a minimum, while the aluminum core maintains a majority of the strength. The SL-K handlebar is XC weight-matched with Enduro strength. With a solid 740mm width and 18mm rise, this bar will help with a perfect fit, great control, and peak performance for even the most demanding rider in mind.
- UD carbon and AL6066 material
- Carbon Structural Integration (CSI)
- Textured stem clamp zone
- 18mm rise
- 9° backsweep, 4° upsweep
- UD carbon finish
$119.99
Broc Raifrod's new signature BROC bar is built around the popular Odyssey Lumberjack XXL bar shape but uses a more narrow "pre-cut" 29" width and slightly less backsweep at 10 degrees.
- 41-Thermal Lifetime Warranty
- 1.8/1.3mm thick, multi-butted main tubing
- Butted, traditional 7/8? crossbar for strength
- Large radius bends for greater durability
- Post-weld heat-treated
$114.99
- Completely redesigned geometry 780mm wide for the aggressive Trail or All Mountain rider.
- Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness
- Shot-peening and anodizing enhances fatigue life even further
- Adjustable to 740mm
- Key Technologies: Vibrocore, Dual XGT, CNC Bending, MGR
- Material: Zirconium Doped 7-Series Alloy
- Weight (g): ±270g (15) / ±275g (25)
- Diameter (mm): 31,8
- Rise (mm): 15 / 25
- Length (mm): 780
- Geometry (deg°): 5° up x 7° back
- Finish: Shot peen anodized, decal logos
$114.99
- DH Race tuned award-winning alloy handlebar design, developed with World Cup professionals
- Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness
- Increased strength and stiffness compared to conventional alloy bars
- Shot-peening and anodizing enhances fatigue life even further
- Adjustable to 740mm
Features
- Key Technologies: Vibrocore, Dual XGT, CNC Bending, Impact Ends, MGR Super 6 Alloy
- Material: MGR Super 6 Alloy
- Weight: ±340g (15mm) / ± 350g (30mm) / ±360g (50mm)
- Sweep: 4° up x 8° back
- Finish: Shot peen anodized, decal logos
$111.99
Origin-8's Classique CargoUnit is a fine 6061 T6-aluminum riser handlebar with a built-in basket. It's the answer to bolt-on baskets and bags that are often unstable. Because the basket is integrated into the bar, your gear rides on a secure, sturdy platform with room for groceries, a gym bag, and a couple burritos. The CargoUnit has a heavy-duty powder-coat finish, too.
$109.99
A traditional looking 4-piece bar that uses larger radius bends, thicker walled, butted tubing and a traditional 7/8" crossbar for strength and durability.
- Multi-Butted, traditional 7/8" crossbar for strength
- Large radius bends for greater durability
- Welded end caps to reduce flex
- Post-weld heat-treated for added strength
$99.99
TruVativ is proud to announce the TRUVATIV CoLab Series, a collection of bars specifically engineered to match the demands of each signature athlete's discipline and riding style — and to enhance each rider's cockpit interface.
- Upsweep: 5°
- Backsweep: 9° (760mm bars)
- Backsweep: 7° (all other bars)
$99.99
Truvativ design built in collaboration with, and featuring the creativity of, Troy Lee Designs. The Truvativ CoLab TLD bar is the command center of cornering with an artistic flair.
- Includes Rockshox sticker pack to give fork and handlebar a unified custom look
- Stiff, precise and wide
- Signature Troy Lee Designs style
- Geometry and 7050 aluminum are designed for DH and gravity events
- Back Sweep (deg): 9
- Upsweep: 5
- Weight: 349g
- Material: Aluminum
$89.99
The BOSS bar is Aaron Ross’ signature bar that is multi-butted and 41-Thermal processed 4130 chromoly.
- Aaron Ross signature
- Proven 41-Thermal processed 4130 chromoly
- Multi-Butted, traditional 7/8" crossbar for strength
$89.99
Wider than Turbine but still sporting the agressive sweep design putting you in the perfect riding position, these bars come in a variety of rises to allow you to fine tune your cockpit and dial in your setup. Tried and tested 7075 aluminum gives you the confidence for agressive all-mountain riding and 35mm technology for fantastic overall weight/strength ratio. Your six inch travel bike will thank you.
- Manufactured from cold drawn, 7075 Aluminium
- 35 optimized triple butted design
- Turned up to Rally control with 800mm width
- Rise sizes to for every build and preference 10/20/35mm
- Stealth black on black decals to match every frame color
$89.99
World Cup quality performance, developed with the pros. SPANK Industries' legendary SPIKE 800 Race handlebar is the 5th generation of the SPIKE Race handlebar legacy, developed in coordination with some of the world’s top DH and Enduro pros. A unique construction of Super 6 alloy, processed with SPANK’s patented CNC bending and Dual-Extreme-Gradual Taper (XGT) technology makes the SPIKE 800 Race handlebar a stronger, safer, performance-optimized component for the weight-conscious gravity rider. The race-tuned geometry and competitive weight make this bar the perfect solution for AM/Enduro to Downhill Race. SPANK's SPIKE 800 Race is the handlebar of choice for Nicholi Rogatkin, Thomas Genon, Tomas Zejda and many more.
- Key technologies: Dual XGT, CNC Bending, Impact Ends, MGR, Super 6 Alloy
- Material: MGR Super Six Alloy
- Weight: ±300g (5mm) / ±310g (15mm) / ±320g (30mm) / ±330g (50mm)
- Diameter: 31.8mm
- Rise: 5mm / 15mm / 30mm / 50mm
- Length: 800mm (Adjustable to 740mm)
- Geometry: 4° up x 8° back
- Finish: Shotpeen anodized, decal logos
$89.95
With a lifetime of experience of riding and winning on trails and racecourses around the world, the Ritchey tradition of designing ideal handlebars continues with the introduction of the WCS 10D Rizer.
Taking inspiration from the original XC 10D flat bar, this 800mm-wide trail bar offers a generous 10° backsweep for perfect wrist alignment, 4° upsweep to reduce pressure on the outside of the hand, and 20mm rise for optimum positioning.
All of this combines to deliver a uniquely comfortable and controllable mountain bike experience. Whether ripping your favorite trails from Moab to Houffalize or your local runs, the Ritchey WCS 10D Rizer bar will help deliver a lifetime of great mountain bike experiences.
- Material: triple-butted 7050 alloy
- Width: 800mm
- Rise: 20mm
- Backsweep: 10°
- Upsweep: 4°
- Clamp diameter: 31.8mm
- Bar-end compatible: yes
- Weight: 350g
$84.99
- AL7050-T6 tubular alloy construction
- 35mm oversized clamp diameter
- 800mm width
- 7°/8° back sweep (Depending on rise dimension)
- 5° upsweep
- ISO-Mountain safety certified
- 290-335g (Depending on rise dimension)
$84.99
- AL7050-T6 tubular alloy construction
- 35mm oversized clamp diameter
- 800mm width
- 7°/8° back sweep (Depending on rise dimension)
- 5° upsweep
- ISO-Mountain safety certified
- 290-335g (Depending on rise dimension)
$84.99
- AL7050-T6 tubular alloy construction
- 35mm oversized clamp diameter
- 800mm width
- 7°/8° back sweep (Depending on rise dimension)
- 5° upsweep
- ISO-Mountain safety certified
- 290-335g (Depending on rise dimension)
$84.99
Anyone who victoriously tears off their shirt after a clip, definitely deserves their own bar. Brett Silva has been on a tear lately and we're stoked to be offering the new BRETT bar.
- Brett Silva Signature
- Laboratory tested and team proven 4130 chromoly with post-weld heat-treatment
- Large radius bends for greater durability
- 1.8/1.3 thick multi-butted main tubing
- ED coating for anti-corrosion protection
- Guaranteed against manufacturing defects
$80.00 - $84.00
The Terminal Bar blends cruiser-style comfort with off-road touring performance. Able to run with a 40mm drop or rise, its swept-back design makes it great for long rides on rough, technical terrain.
- 22.2mm diameter grip area; good to go for MTB shifters, brake levers, and grips
- 34 degree backsweep with a 40mm + / - rise
$79.99
Race Face Atlas riser handlebar with an anodized, shot-peened finish.
- Aonodized, shot-peened finish
- Cold-drawn and butted proprietary AirAlloy aluminum tubing
- 4 degree upsweep
$76.49
- AL7050 tubular alloy construction
- 31.8mm clamp diameter
- 800mm width
- 7° back sweep
- ISO-Mountain safety certified
- 310-350g (Depending on rise dimension)
$75.00
Whatever your adventure, Rustler handlebars are tough, durable, and comfortable. Whether you are out exploring a new trail or devouring your favorite descent, they’ll help keep you in control and ready for the terrain ahead.
- Lightweight and strong 7050-T6 series aluminum alloy construction
- Signature 11° back sweep, 6° up sweep, 20mm rise
- 800mm and 750mm width options
- Graduated lines for easy trimming
- 31.8mm clamp diameter with 93mm width for use with Salsa Anything Cradle and aerobars
- Weight: 330g
- Note: Rustler bars are not compatible with bar ends
$75.00
In today’s fast-paced world of riseless flat bars and far-too-aggressive-for-our-liking cockpits, Surly harkens back to simpler times. They wanted a handlebar that would suffice for a relaxed cruise to a favorite windowless bar, but would also be suitable should a person decide to take the long way home. The Sunrise Bar is a cruiser bar, a trail bar, and a BMX bar all rolled into one. It has a 22.2mm clamp diameter, but Surly included some Problem Solvers shims so you can mount it up to your fancy 31.8mm stem.
Material: CroMoly steel
Clamp diameter: 22.2mm; Includes shims for 31.8mm clamp
Width: 820mm; Can be cut to 720mm
Rise: 83mm
Sweep Angle: 14.7 degree backsweep, 6.7 degree upsweep
Weight: 778g including shims
Color: Black
$75.00
We set out to make a handlebar that’s upright, durable, and capable of resurrecting a parts-bin bike or transforming a newer slice of steel into something more. What we came up with is the Sunset Bar. We liken it to its sibling, the Sunrise Bar, with BMX-inspired style and vertical posture. Procure one yourself for a fresh take on front end grip.
- Constructed with 4130 Chromoly Custom-Butted Steel tubing for enhanced strength and comfort, and finished in an anti-rust Black ED coat for longevity
- Brings comfort, style, and durability by fitting a more upright position with 110mm of rise, 22-degree backsweep, and 14-degree upsweep
- Adds height to frames with short steerer tubes or headtubes
- Tested to comply with ASTM 3 and ISO Mountain Standards for rowdy trail riding and beyond
Specifications:
Material: Post-weld heat-treated Chromoly Steel
Clamp Diameter: 22.2mm; Includes shims for 31.8mm clamp
Width: 820mm
Rise: 110mm
Sweep Angle: 22 degree backsweep, 14 degree upsweep
Weight: 827g including shims
Color: Black
$75.00
You say you want a wide, stiff, strong, championship-winning design? Here you go. The new Descendant DH bar borrows from a rich championship-winning heritage, and adapts it to today’s aggressive courses and riders. Descendant DH bars are the command center of cornering control.
- Material: Al-7050
- Width: 800mm
- Backsweep: 9-degrees
- Rise: 25mm
- Upsweep: 5-degrees
- Colors: Black
$72.49
- AL6066-T6 tubular alloy construction
- 35mm oversized clamp diameter
- 800mm width
- 7°/8° back sweep (Depending on rise dimension)
- 5° upsweep
- ISO-Mountain safety certified
- 290-335g (Depending on rise dimension)
$72.49
- AL6066-T6 tubular alloy construction
- 35mm oversized clamp diameter
- 800mm width
- 7°/8° back sweep (Depending on rise dimension)
- 5° upsweep
- ISO-Mountain safety certified
- 290-335g (Depending on rise dimension)
$72.49
- AL6066-T6 tubular alloy construction
- 35mm oversized clamp diameter
- 800mm width
- 7°/8° back sweep (Depending on rise dimension)
- 5° upsweep
- ISO-Mountain safety certified
- 290-335g (Depending on rise dimension)
$69.99
The 10-4 bar features large radius bends, thicker walled butted tubing and a traditional 7/8" crossbar.
- 41-Thermal processed 4130 chromoly
- Multi-butted
$69.99
Rock-solid in the park or on the trail, the Spank Spoon 800 handlebar gets a refresh for 2020. With new, fresh graphics, the Spoon bar is now 800mm wide for ultimate control. In addition, you can dial in your fit with the ability to cut it down to 740mm for a wide variety of uses.
Spank Spoon: the best-priced handlebar on the market without compromise!
- Cost-effective upgrade to your 31.8mm cockpit without sacrificing quality
- Freeride inspired all-mountain geometry makes the bar extremely versatile
- Shot-peening and anodizing enhances fatigue life
- Dial your fit—adjustable to 740mm
- Recommended for: ASTM 5, All mountain, trail, free ride, DH, E-Bike
$69.99
Based on team rider feedback, Sunday introduces the new Nightshift Handlebars.
- Laboratory tested and team proven
- 4130 chromoly with post-weld heat-treatment
- Large radius bends for greater durability
- Traditional 7/8" crossbar for strength
- 1.8/1.3 thick multi-butted main tubing
- ED coating for anti-corrosion protection
$68.99
A25Y Alloy Riser Bar
- Cut marks provide a range of width options
- Textured Grit Grip finish in clamp areas eliminates over-tightening of components
$67.99
Origin-8's Space Off Road II Handlebar is ready to explore the final trail frontier. This radical bar is crafted from lightweight aluminum and features a 50mm sweep and 37.5mm rise. But it's not just for looks — it lets you distribute your weight and hand placement in multiple ways for more control and comfort.
$59.49
- Economical 6066 aluminum alloy mountain handlebar
- 800mm width
- 3 rise options
- Back sweep: 7°
- 310-350g (Depending on rise dimension)
$54.99
Do you love to ride your mountain bike? Love boosting big airs, punishing the trails and your gear? You just want parts that can take a beating and won't let you down — the Chester 35 bar is made for you. These bars will last long after your bones, bruises and scrapes heal up and you're ready to tackle that gap jump that has had your number.
- Manufactured from cold drawn, seamless 6061 Aluminum
- Shot peened for increased fatigue life
- 35 optimized triple butted design
$50.00
TruVativ's super-tough Hussefelt Riserbar is made from triple-butted AL-66 for a long fatigue life and great strength. The wide bar and high rise gives you an upright position for greater control in technical sections and confidence on steep descents.
$49.95
- The Comp Buzzard features a 70mm flat rise
- Offers a more upright riding position for comfort when touring or bikepacking ‚ especially on bikes with a lower stack height
- 820mm wide and a 27.5-degree backsweep offer plenty of control\n- Bar end compatible
- Double-butted 6061 alloy
- 376g
$45.00
Budget-friendly mountain bars with stylish flair.
- Plain gauge, tapered and shot-peened AL6061/T6
- Shot-peened for surface hardness
- 15mm rise
- 9° backsweep, 4° upsweep
- Bar Clamp Diameter: 31.8mm
- Material: Alloy
- Width: 740mm
$45.00
Profile's Ultra FR is a tough riser bar that gives you extra control in technical sections and confidence on rough descents. It's made of double-butted 6061-T6 aluminum, which offers superior strength and stiffness and weighs next to nothing.
$42.49
Origin-8's Pro Rise All Mountain Handlebar is made from lightweight, durable 6061-T6 butted aluminum. It provides a 40mm rise with a wrist-friendly 5-degree sweep and a 625mm width.
Page 1 of 2
Next page